Editorial policies

Table of contents

·      Overview

·      Communicate with Respect

·      Ethics and consent

·      Research involving human embryos, gametes, and stem cells

·      Sex and gender in research (SAGER)

·      Research involving animals

·      Research involving plants

·      Research involving palaeontological and geological material

·      Dual Use Research of Concern

·      Standards for research in complementary and alternative medicine

·      Consent for publication

·      Trial registration

·      Availability of data and materials

·      Standards of reporting

·      Describing new taxa

·      Competing interests

·      Authorship

·      Artificial Intelligence (AI)

·      Citations

·      Preprint sharing and citation

·      Duplicate publication

·      Communications of findings prior to publication

·      Text recycling

·      Peer review

·      Confidentiality

·      Misconduct

·      Corrections and retractions

·      Appeals and complaints

·      Collections and Special Issues

Overview

Back to top

BMC is a member of the Committee on Publication Ethics (COPE) and endorses the World Association of Medical Editors (WAME) Policy Statement on Geopolitical Intrusion on Editorial Decisions. BMC also endorses the International Committee of Medical Journal Editors (ICMJE) Recommendations for the Conduct, Reporting, Editing and Publication of Scholarly Work in Medical Journals.

Submission of a manuscript to a BMC journal implies that all authors have read and agreed to its content and that the manuscript conforms to the journal’s policies.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. 

Communicate with Respect

Back to top

At Springer Nature we believe that only through relationships based upon mutual respect can we build trust and deliver quality publishing products and services to the communities we serve. Our staff are expected to behave professionally and respectfully at all times when engaging with authors, reviewers and readers. Likewise, we expect the same standards of behavior from the academic community and the public in their interactions with our staff. We do not tolerate aggressive behavior, or any form of harassment, bullying or discrimination directed against Springer Nature staff. We reserve the right to bring serious cases to the attention of employers or local authorities, if needed, and may refuse to interact, or do business, with individuals who repeatedly or seriously violate this policy.

Ethics and consent

Back to top

Ethics approval

Research involving human participants, human material, or human data, must have been performed in accordance with the Declaration of Helsinki and must have been approved by an appropriate ethics committee. A statement detailing this, including the name of the ethics committee and the reference number where appropriate, must appear in all manuscripts reporting such research. If a study has been granted an exemption from requiring ethics approval, this should also be detailed in the manuscript (including the name of the ethics committee that granted the exemption). Further information and documentation to support this should be made available to the Editor on request. Manuscripts may be rejected if the Editor considers that the research has not been carried out within an appropriate ethical framework. In rare cases, the Editor may contact the ethics committee for further information.

Retrospective ethics approval

If a study has not been granted ethics committee approval prior to commencing, retrospective ethics approval usually cannot be obtained and it may not be possible to consider the manuscript for peer review. The decision on whether to proceed to peer review in such cases is at the Editor's discretion.

New clinical tools and procedures

Authors reporting the use of a new procedure or tool in a clinical setting, for example as a technical advance or case report, must give a clear justification in the manuscript for why the new procedure or tool was deemed more appropriate than usual clinical practice to meet the patient’s clinical need. Such justification is not required if the new procedure is already approved for clinical use at the authors’ institution. Authors will be expected to have obtained ethics committee approval and informed patient consent for any experimental use of a novel procedure or tool where a clear clinical advantage based on clinical need was not apparent before treatment.

Consent to participate

For all research involving human participants, informed consent to participate in the study should be obtained from participants (or their parent or legal guardian in the case of children under 16) and a statement to this effect should appear in the manuscript. For manuscripts reporting studies involving vulnerable groups (for example, unconscious patients) where there is the potential for coercion (for example prisoners) or where consent may not have been fully informed, manuscripts will be considered at the editor’s discretion and may be referred to an internal editorial oversight group for further scrutiny. Consent must be obtained for all forms of personally identifiable data including biomedical, clinical, and biometric data. In the case of articles describing human transplantation studies, authors must include a statement declaring that no organs/tissues were obtained from prisoners and must also name the institution(s)/clinic(s)/department(s) via which organs/tissues were obtained. Documentary evidence of consent must be supplied if requested.

Research involving human embryos, gametes, and stem cells

Back to top

Manuscripts that report experiments involving the use of human embryos and gametes, human embryonic stem cells and related materials, and clinical applications of stem cells must include confirmation that all experiments were performed in accordance with relevant guidelines and regulations (See also Ethics and Consent)

The manuscript should include an ethics statement identifying the institutional and/or national research ethics committee (including the name of the ethics committee) approving the experiments and describing any relevant details. Authors should confirm that informed consent (See also Ethics and Consent and Consent for publication) was obtained from all recipients and/or donors of cells or tissues, where necessary, and describe the conditions of donation of materials for research, such as human embryos or gametes. Copies of approval and redacted consent documents may be requested by the Editor.

We encourage authors to follow the principles laid out in the 2016 ISSCR Guidelines for Stem Cell Research and Clinical Translation.

In deciding whether to publish papers describing modifications of the human germline, the Editors are guided by safety considerations, compliance with applicable regulations, as well as the status of the societal debate on the implications of such modifications for future generations. In case of concerns regarding a particular type of study the Editor may seek advice from the Springer Nature Research Integrity Group.

The decision to publish a paper is the responsibility of the Editor-in-Chief of the Journal.

Sex and gender in research (SAGER)

Back to top

We encourage our authors to follow the ‘Sex and Gender Equity in Research – SAGER – guidelines’ and to include sex and gender considerations where relevant. Authors should use the terms sex (biological attribute) and gender (shaped by social and cultural circumstances) carefully in order to avoid confusing both terms. Article titles and/or abstracts should indicate clearly what sex(es) the study applies to. Authors should also describe in the background, whether sex and/or gender differences may be expected; report how sex and/or gender were accounted for in the design of the study; provide disaggregated data by sex and/or gender, where appropriate; and discuss respective results. If a sex and/or gender analysis was not conducted, the rationale should be given in the Discussion. We suggest that our authors consult the full guidelines before submission.

·      Definition of Sex and Gender (taken from Office of Research in Women’s Health, NIH).

·      Sex - refers to biological differences between females and males, including chromosomes, sex organs, and endogenous hormonal profiles.

·      Gender-  refers to socially constructed and enacted roles and behaviors which occur in a historical and cultural context and vary across societies and over time.

·      Applications of the guidelines: These guidelines apply to studies involving humans,  vertebrate animal and cell lines.

Research involving animals

Back to top

Experimental research on vertebrates or any regulated invertebrates must comply with institutional, national, or international guidelines, and where available should have been approved by an appropriate ethics committee. The  International Council for Laboratory Animal Science (ICLAS) has published ethical guidelines.

A statement detailing compliance with relevant guidelines (e.g. the revised Animals (Scientific Procedures) Act 1986 in the UK and Directive 2010/63/EU in Europe) and/or ethical approval (including the name of the ethics committee and the reference number where appropriate) must be included in the manuscript. If a study has been granted an exemption from requiring ethics approval, this should also be detailed in the manuscript (including the name of the ethics committee that granted the exemption and the reasons for the exemption). The Editor will take account of animal welfare issues and reserves the right to reject a manuscript, especially if the research involves protocols that are inconsistent with commonly accepted norms of animal research. In rare cases, the Editor may contact the ethics committee for further information.

Manuscripts presenting studies that have employed anesthesia or euthanasia methods inconsistent with the commonly accepted norms of veterinary best practice (e.g. chloral hydrate, ether, and chloroform) will not be considered. Decisions to not consider manuscripts presenting such anesthesia or euthanasia methods are independent of the approving ethics committee and any previously published work. We recommend that authors consult the American Veterinary Medical Association (AVMA) Guidelines for the Euthanasia of Animals (2020), as a comprehensive resource for guidance on veterinary best practice for the anesthesia and euthanasia of animals.

For experimental studies involving client-owned animals, authors must also document informed consent from the client or owner and adherence to a high standard (best practice) of veterinary care.

Field studies and other non-experimental research on animals must comply with institutional, national, or international guidelines, and where available should have been approved by an appropriate ethics committee. A statement detailing compliance with relevant guidelines and/or appropriate permissions or licences must be included in the manuscript. We recommend that authors comply with the IUCN Policy Statement on Research Involving Species at Risk of Extinction  and the Convention on the Trade in Endangered Species of Wild Fauna and Flora.

Research involving plants

Back to top

Experimental research and field studies on plants (either cultivated or wild), including the collection of plant material, must comply with relevant institutional, national, and international guidelines and legislation.  

Manuscripts should include a statement specifying the appropriate permissions and/or licences for collection of plant or seed specimens. We recommend that authors comply with the IUCN Policy Statement on Research Involving Species at Risk of Extinction and the Convention on the Trade in Endangered Species of Wild Fauna and Flora.

To support reproducibility, voucher specimens for all wild plants described in a manuscript must be deposited in a public herbarium or other public collection that provides access to deposited material. Information on the voucher specimen and who identified it must be included in the manuscript.

Research involving palaeontological and geological material

Details of palaeontological specimens and geological samples should include clear provenance information to ensure full transparency of the research. 

It is recognized that precise provenance information may not be available for older museum collections. In circumstances where providing specific provenance information may compromise the security of palaeontological or geological sites it may be appropriate to exclude detailed locality information. 

Samples must always be collected and exported in a responsible manner and in accordance with applicable local and national laws. Any submission detailing new material should include information regarding the requisite permissions obtained and the issuing authority. Authors may be required to provide specific supporting documentation upon request. 

Type, figured and cited palaeontological specimens, should be deposited in a recognised museum or collection to permit free access by other researchers in perpetuity. Sufficient information on the repository, including the assigned unique catalogue numbers (where applicable), should be provided to allow the specimens to be traced. 

We encourage deposition of 3-D scans of fossil specimens (where appropriate) within a permanent, accessible repository to facilitate study by the scientific community. 

Springer Nature requires that submitted content adheres to the United Nations Educational, Scientific and Cultural Organization (UNESCO) normative instruments for the protection of cultural heritage, and Resolutions, Motions, guidance and other statements of the International Union for the Conservation of Nature (IUCN). 

Dual Use Research of Concern

Back to top

Some manuscripts provide information that could be directly misapplied to pose a significant threat to public health, safety or security, agricultural crops and other plants, animals, or the environment. For such information to be published, the benefit to the research community, society, or to public health, must outweigh any risks. We reserve the right to take expert advice in cases where we believe that concerns may arise, and we may require a manuscript to undergo peer review specifically to assess the dual use risk. Where the risk of misuse outweighs any potential benefit, publication is declined; published content may be corrected, retracted or removed. 

Researchers are expected to comply with their institutional and funder’s requirements, as well as any national regulations. They should be aware of dual-use concerns related to their work and take steps to minimize misuse of their research. Such concerns include, but are not limited to, biosecurity, nuclear and chemical threats. Where relevant regulations exist, authors should disclose whether their study is subject to consideration as dual use research of concern; if it is, the manuscript should report the authority granting approval and reference number for the regulatory approval. When the study reports material that can be harmful outside the laboratory context, the manuscript should describe appropriate containment (e.g. biosafety) procedures. 

We recognize the widespread view that openness in science helps to alert society to potential threats and to defend against them, and we anticipate that only very rarely will the risks be perceived as outweighing the benefits of publishing a paper that has otherwise been deemed appropriate for publication.

Standards for research in complementary and alternative medicine

Back to top

Springer Nature journals are committed to evidence-based research. We believe that Complementary and Alternative Medicine (CAM) research should be held to the same standards and evidence threshold as those of medicine research.

We welcome manuscripts for submission which meet the following clinical research standards:

·      Clinical research manuscripts that comply with international and national standards for such work (such as the Declaration of Helsinki or relevant Governmental regulation e.g. the UK’s The Medicines for Human Use (Clinical Trials) Regulations). 

·      Studies which are adequately controlled (be that compared to a placebo or conventional medicine), blinded (where appropriate), randomised and of sufficient statistical power to confidentially and accurately interpret the effect reported.  Studies reporting a CAM treatment/technique compared only to another CAM treatment/technique are not sufficient to test the efficacy of the CAM treatment in question. Studies in which a conventional treatment is supplemented with a CAM technique are only valid if compared to the same conventional treatment supplemented with a placebo.

·      CAM treatments/techniques tested on animal models and/or human patients: It is unethical for such work, on humans or animals, to have taken place without adequate prior evidence that the treatment/technique shows some potential of being therapeutic.  Manuscripts must include evidence that takes the form of objective, measurable data from previously published peer reviewed literature which adheres to scientific principles (for instance in vitro or cellular work). Other forms of evidence are not valid. Manuscripts describing work lacking this evidence will not be considered on ethical grounds.

Consent for publication

Back to top

For all manuscripts that include details, images, or videos relating to an individual person, written informed consent for the publication of these details must be obtained from that person (or their parent or legal guardian in the case of children under 18). The consent must be for publication of their details under the relevant Creative Commons license (such that they will be freely available on the internet). If the person has died, consent for publication must be obtained from their next of kin. The manuscript must include a statement that written informed consent for publication was obtained.

Human Research Participant Publication Approval Templates: English / German - can be used to obtain consent from human research participants/patients where there may be identifiable information and/or media. The consent form must state that the details/images/videos will be freely available on the internet and may be seen by the general public.

In cases where images are entirely unidentifiable and there are no details on individuals reported within the manuscript, consent for publication of images may not be required. The final decision on whether consent to publish is required lies with the Editor.

Further information, including Third Party Rights for dissemination, is available on the Springer Nature pages.

Trial registration

Back to top

BMC supports initiatives to improve reporting of clinical trials. This includes prospective registration of clinical trials in suitable publicly available databases. In line with ICMJE guidelines, BMC requires registration of all clinical trials that are reported in manuscripts submitted to its journals.

The ICMJE uses the World Health Organization (WHO) definition of a clinical trial, which is "any research study that prospectively assigns human participants or groups of humans to one or more health-related interventions to evaluate the effects on health outcomes". This definition includes phase I to IV trials. The ICMJE defines health-related interventions as "any intervention used to modify a biomedical or health-related outcome" and health-related outcomes as "any biomedical or health-related measures obtained in patients or participants". Authors who are unsure whether their trial needs registering should consult the ICMJE FAQs for further information.

Suitable publicly available registries are those listed on the ICMJE website as well as any of the primary registries that participate in the WHO International Clinical Trials Registry Platform, including the ISRCTN registry, which is administered and published by BMC.

The trial registration number (TRN) and date of registration should be included as the last line of the manuscript abstract.

Publication of study protocols reduces the risk of non-publication of research findings and facilitates methodological discussion, and is encouraged by a number of BMC journals. If the study protocol for a trial has been published, then it should be cited in the manuscript. 

For clinical trials that have not been registered prospectively, BMC encourages retrospective registration to ensure the complete publication of all results. Further information on retrospective registration is available from the AllTrials campaign, the Public Accounts Committee and the Department of Health.

Many journals published by BMC will consider manuscripts describing retrospectively registered studies. The TRN, date of registration and the words 'retrospectively registered’ should be included as the last line of the manuscript abstract.

Registration of systematic reviews

BMC supports the prospective registration of systematic reviews and encourages authors to register their systematic reviews in a suitable registry (such as PROSPERO). Authors who have registered their systematic review should include the registration number as the last line of the manuscript abstract.

Availability of data and materials

Back to top

Submission of a manuscript to a BMC journal implies that materials described in the manuscript, including all relevant raw data, will be freely available to any scientist wishing to use them for non-commercial purposes, without breaching participant confidentiality.

For all journals, BMC strongly encourages that all datasets on which the conclusions of the paper rely should be available to readers, and where there is a community established norm for data sharing, BMC mandates data deposition (for data types with required deposition, see below). 

We encourage authors to ensure that their datasets are either deposited in publicly available repositories (where available and appropriate) or presented in the main manuscript or additional supporting files, in machine-readable format (such as spreadsheets rather than PDFs) whenever possible. Please see the Data repository guidance page for further information. For several journals, deposition of the data on which the conclusions of the manuscript rely is required. Please check the individual journal’s Submission Guidelines for more information.

Authors who need help understanding our data sharing policies, finding a suitable data repository, or organising and sharing research data can access our Author Support portal for additional guidance.

Mandated data deposition based on community-established norms

For certain data types (for example genomic data, nucleic acid or protein sequences), BMC mandates data deposition in a public access repository upon submission as there is a community-accepted standard of data deposition and data sharing. 

Please consult this list of mandated data types, ensuring any relevant data are deposited in an appropriate repository and linked from your manuscript.

Such data must be available to editors and reviewers to evaluate during peer review and has to be released without restriction to the public upon publication.

Special considerations

*DNA and RNA sequences: Deposition of novel DNA and RNA sequence, and novel genome assembly data is mandated while we strongly encourage depositions of all DNA and RNA sequences. Novel DNA sequence, novel RNA sequence, and novel genome assembly data must be deposited to repositories that are part of the International Nucleotide Sequence Collaboration (INSDC), or those which are working towards INSDC inclusion. When publishing reference genomes, the assembly must be made available in addition to the raw sequence reads. Sequences must be deposited even for short stretches of novel sequence information such as epitopes, functional domains, genetic markers, or haplotypes. We encourage short novel sequences to be supplemented with surrounding sequence information to provide context. The sequences of all small RNA probes central to the conclusions of the paper must be provided. BMC highly encourages the deposition of microbial assemblies derived from metagenomics data.

Genomics and transcriptomics datasets: When depositing genomic and transcriptomics datasets, BMC encourages the provision of the metadata to allow for reproduction of the dataset. We encourage including annotations where applicable, especially when presenting data of unsequenced genomes. 

Linked phenotype and genotype data for human subjects: Should be submitted to a publicly accessible repository with appropriate access controls. Any restrictions on data access for sensitive data (for example electronic medical records, forensic data, and personal data from vulnerable populations) require an explanation of the nature of and reasons for the restrictions, and details of the conditions under which the data can be accessed or reused. 

Gene expression data: Data derived from microarray studies must be MIAME compliant.

Publication of clinical datasets

For datasets containing clinical data, authors have an ethical and legal responsibility to respect participants’ rights to privacy and to protect their identity. Ideally, authors should gain informed consent for publication of the dataset from participants at the point of recruitment to the study or trial. If this is not possible, authors must demonstrate that publication of such data does not compromise anonymity or confidentiality or breach local data protection laws, for the dataset to be considered for publication. Authors must consider whether the dataset contains any direct or indirect identifiers (see here for further information) and consult their local ethics committee or another appropriate body before submission if there is any possibility that participants will not be fully anonymous. Authors must state in their manuscript on submission whether informed consent was obtained for publication of patient data. If informed consent was not obtained, authors must state the reason for this, and which body was consulted in the preparation of the dataset.

Software and code

Any previously unreported software application or custom code described in the manuscript should be available for testing by editors and reviewers in a way that preserves their anonymity. The manuscript should include a description in the Availability of Data and Materials section of how the editors and reviewers can access the unreported software application or custom code. This section should include a link to the most recent version of your software or code (e.g. Zenodo or Code Ocean) as well as a link to the archived version referenced in the manuscript. The software or code should be archived in an appropriate repository with a DOI or other unique identifier. For software in GitHub, we recommend using Zenodo. If published, the software application/tool should be readily available to any scientist wishing to use it for non-commercial purposes, without restrictions (such as the need for a material transfer agreement). If the implementation is not made freely available, then the manuscript should focus clearly on the development of the underlying method and not discuss the tool in any detail.

Discipline-specific community-recognized repositories 

Data should be submitted to discipline-specific, community-recognized repositories where possible. See our data policy guidance for more information. Where a suitable discipline-specific resource does not exist, data should be submitted to a generalist repository. 

Availability of research materials

Submission of a manuscript to a BMC journal implies that any unique materials described in the manuscript will be freely available to scientists wishing to use them for non-commercial purposes, without breaching participant confidentiality. Research materials include uniquely generated resources, such as strains, tools, chemical compounds, antibodies, cell-lines or mutant lines. 

It is acceptable to request reasonable payment to cover costs of distribution, and reagents may be made available via commercial or non-commercial third party providers. For biological materials such as mutant strains and cell lines, BMC encourages authors to use established public repositories where available and persistent identifiers and/or accession numbers of such resources should be listed in the manuscript. Any restrictions on availability of materials, including if materials are to be distributed by a for-profit company, must be clearly stated in the paper. 

For studies where new research materials have been generated, BMC encourages the following statement to be included in the ‘Availability of data and materials’ section:

[REAGENTS/TOOLS/MATERIALS] generated in this study are available from the corresponding author upon request.

Availability of data and materials statements

All authors must include an “Availability of Data and Materials” section in their manuscript detailing where the data supporting their findings can be found. If your data cannot  be shared openly, please include a statement to this effect, and provide the reason as to why the data cannot be shared openly. On some journals, the editors may decline further consideration of the manuscript after evaluation if restrictions are found to be unduly prohibitive.

BMC encourages data availability statements for manuscripts reporting clinical trial data to follow the standards set out in the ICMJE recommendations on clinical trial data sharing suggesting the following information to be provided: 

whether individual de-identified participant data (including data dictionaries) will be shared (“undecided” is not an acceptable answer); what data in particular will be shared; whether additional, related documents will be available (e.g., study protocol, statistical analysis plan, etc.); when the data will become available and for how long; by what access criteria data will be shared (including with whom, for what types of analyses, and by what mechanism).

Availability of data and materials statements can take one of the many forms (or a combination of more than one if required for multiple datasets). For more information on how to draft a Data availability statement and examples of published statements, visit Springer Nature’s guidance to Data Availability Statements here and read further tips in this blog here.

Data citation

BMC endorses the Force 11 Data Citation Principles and requires that all publicly available datasets be fully referenced in the reference list with an accession number or unique identifier such as a digital object identifier (DOI). Citations of datasets, when they appear in the reference list, should include the minimum information recommended by DataCite and follow journal style. Dataset identifiers including DOIs should be expressed as full URLs.  

Example of an “Availability of data and materials” statement
The data described in this article can be freely and openly accessed at Harvard Dataverse: https://doi.org/10.7910/DVN/J9EUZU [1]. 

With data cited in the reference list as
[1] Correndo AA, Moro Rosso LH, Ciampitti IA. Agrometeorological data using R-software. Harvard Dataverse. 2021. https://doi.org/10.7910/DVN/J9EUZU.

Post-publication access of data

BMC journals mandate that all materials described in the manuscript, including all relevant raw data, will be freely available post-publication to any scientist wishing to use them for non-commercial purposes without restriction, without breaching participant confidentiality. After publication, authors must comply with the data availability statement included in the manuscript and arrange to make the data available to any reader as indicated in the manuscript. For datasets where it is the community norm to share data, BMC expects that all datasets on which the conclusions of the paper rely are made available to readers via community-accepted repositories linked to the manuscript via permanent identifiers. If the original data cannot be produced, the Editor may investigate further and reserves the right to contact the institution or funding body. In the case of published articles, inability to gain access to the requested data may lead to a retraction.

Third party data and analysis

When a third party is used to generate or analyse part or all of the data presented in the study, this should be clearly stated within the ‘Methods’ and/or ‘Availability of data and Materials’ sections. The corresponding author is responsible for all data presented within the published manuscript (for more information, refer to the roles and responsibilities of the corresponding author under “Authorship”). When data obtained from third parties cannot be made available, the restrictions should be clearly stated in the data availability statement. Authors must make data available for purposes of peer review, if requested by reviewers, within the terms of a data use agreement and if compliant with ethical and legal requirements.

Standards of reporting

Back to top

BMC advocates complete and transparent reporting of biomedical and biological research. For biomedical and biological research, the checklist below must be completed before peer review, and made available to the Editors and reviewers.

·      Randomized controlled trials (CONSORT)

We strongly recommend that authors refer to the minimum reporting guidelines for health research hosted by the EQUATOR Network when preparing their manuscript, and FAIRsharing.org for reporting checklists for biological and biomedical research, where applicable. 

In addition, BMC strongly encourage the use of the following checklists and reporting guidelines:

·      Protocols for randomized controlled protocols (SPIRIT)

·      Systematic reviews and meta-analyses* (PRISMA) and protocols (PRISMA-P)

·      Observational studies (STROBE)

·      Case reports (CARE)

·      Qualitative research (COREQ)

·      Diagnostic/prognostic studies (STARD and TRIPOD)

·      Economic evaluations (CHEERS)

·      Pre-clinical animal studies (ARRIVE)

·      Statistics checklists for editors and reviewers to use when evaluating the statistics in manuscripts:

·      Life Sciences journals

·      Medical journals

·      Statistics, Mathematics and Computer Science journals

In addition, journals may mandate that other reporting guidelines are followed and the exact requirements may vary depending on the journal; please refer to the journal’s submission guidelines.

*Authors of systematic reviews should also provide a link to an additional file from the ‘methods’ section, which reproduces all details of the search strategy. For an example of how a search strategy should be presented, see the Cochrane Reviewers' Handbook.

Statistical methods

Authors should include full information on the statistical methods and measures used in their research, including justification of the appropriateness of the statistical test used (see the SAMPL guidelines for more information). Reviewers will be asked to check the statistical methods, and the manuscript may be sent for specialist statistical review if considered necessary.

Resource identification

To enable effective tracking of the key resources used to produce the scientific findings reported in the biomedical literature, authors are expected to include a full description of all resources with enough information to allow them to be uniquely identified. In support of the Resource Identification Initiative (RII), we encourage authors to use unique Resource Identifiers (RRIDs) within their manuscript to identify their model organisms, antibodies, or tools.

Cell line authentication

If human cell lines are used, authors are strongly encouraged to include the following information in their manuscript:

·      The source of the cell line, including when and from where it was obtained

·      Whether the cell line has recently been authenticated and by what method

·      Whether the cell line has recently been tested for mycoplasma contamination

Further information is available from the International Cell Line Authentication Committee (ICLAC). We recommend that authors check the NCBI database for misidentification and contamination of human cell lines.

Gene nomenclature

Standardized gene nomenclature should be used throughout. Human gene symbols and names can be found in the HUGO Gene Nomenclature Committee (HGNC) database; requests for new gene symbols should be submitted here and any enquiries about gene nomenclature can be directed here. Alternative gene aliases that are commonly used may also be reported, but should not be used alone in place of the HGNC symbol. Nomenclature committees for other species are listed here.

Reporting of sequence variants

We endorse the recommendations of the Human Variome Project Consortium for describing sequence variants (Human Genome Variation Society) and phenotypes (Human Phenotype Ontology).

We recommend that authors should submit all variants described in a manuscript to the relevant public gene/disease specific database (LSDB): a list is available here. The database URL and the unique identifier should be reported in the manuscript.

Data

To drive the maximum re-use and utility of published research, we expect authors to comply with available field-specific standards for the preparation and recording of data. Please see the FAIRsharing website for information on field-specific data standards. Authors must comply with best practice in their field for sharing of data, with particular attention to maintaining patient confidentiality.

Authors using unpublished genomic data are expected to abide by the guidelines of the Fort Lauderdale and Toronto agreements. Based on broadly accepted scientific community standards, the key requirement of third parties using genomic data is to contact the owners of unpublished data (i.e. the principal investigator and sequencing centre) prior to undertaking their research, to advise them about their planned analyses.

Digital image integrity

Adapted from the Journal of Cell Biology and from Nature Research.

While a certain degree of image processing is unavoidable for some experiments, fields and techniques, in all instances, the final image presented in the published article must accurately represent the original data and conform to community standards. The guidelines on image processing presented below will aid in accurate data presentation; authors must also take care to exercise caution during data acquisition to avoid misrepresentation of the data collected.

Authors should list all image acquisition tools and image processing software packages used, noting the specific version of the software. If the data were processed with custom code, this should be fully described and deposited into a community repository. All image-gathering settings and processing manipulations should be fully described in the methods.

When preparing figures for publication, adhere to the following guidelines:

·      Images gathered at different times or from different locations should not be combined into a single image, unless it is stated that the resultant image is a product of time-averaged data or a time-lapse sequence. If juxtaposing images is essential, the borders should be clearly demarcated in the figure and described in the legend.

·      Touch-up tools, such as cloning and healing tools in Photoshop, or any feature that deliberately obscures manipulations, should not be used.

·      Processing (such as changing brightness and contrast) is appropriate only when it is applied equally across the entire image and is applied equally to controls. Contrast should not be adjusted so that data disappear. Excessive manipulations, such as processing to emphasize one region in the image at the expense of others (e.g. through the use of a biased choice of threshold settings), are inappropriate, as is emphasizing experimental data relative to the control.

·      Authors should be prepared to submit original, unprocessed images on request.

Electrophoretic gels and blots

The display of cropped gels and blots in the main paper is allowed if it improves the clarity and conciseness of the presentation. In such cases, the cropping must be mentioned in the figure legend. For some BMC journals, the inclusion of the original, uncropped gel or blot is mandatory and  the full length original blot or gel should be included in the additional files.

·      Quantitative comparisons between samples on different gels/blots are discouraged; if this is unavoidable, the figure legend must state that the samples derive from the same experiment and that gels/blots were processed in parallel. Vertically sliced images that juxtapose lanes that were non-adjacent in the gel must have a clear separation or a black line delineating the boundary between the gels. Loading controls must be run on the same blot.

·      Cropped gels in the paper must retain important bands.

·      High-contrast gels and blots are discouraged, as overexposure may mask additional bands. Authors should strive for exposures with gray backgrounds. Multiple exposures should be presented in Supplementary Information if high contrast is unavoidable. Immunoblots should be surrounded by a black line to indicate the borders of the blot, if the background is faint.

·      For quantitative comparisons, appropriate reagents, controls and imaging methods with linear signal ranges should be used.

Microscopy

Authors should be prepared to supply the journal with original data on request, at the resolution collected, from which their images were generated. Cells from multiple fields should not be juxtaposed in a single field; instead multiple supporting fields of cells should be shown as Supplementary Information.

·      Adjustments should be applied to the entire image. Threshold manipulation, expansion or contraction of signal ranges and the altering of high signals should be avoided. If 'pseudo-colouring' and nonlinear adjustment (e.g. 'gamma changes') are used, this must be disclosed. Adjustments of individual colour channels are sometimes necessary on 'merged' images, but this should be noted in the figure legend.

·      In the methods, specify the type of equipment (microscopes/objective lenses, cameras, detectors, filter model and batch number) and acquisition software used. Although we appreciate that there is some variation between instruments, equipment settings for critical measurements should also be listed. In addition, processing software should be named and manipulations indicated (such as type of deconvolution, three-dimensional reconstructions, surface and volume rendering, 'gamma changes', filtering, thresholding and projection).

·      Authors should state the measured resolution at which an image was acquired and any downstream processing or averaging that enhances the resolution of the image.

Describing new taxa

Back to top

Algal, fungal, and botanical names

Since January 2012, the electronic publication of algal, fungal, and botanical names has been a valid form of publication. Manuscripts containing new taxon names or other nomenclatural acts must follow the guidelines set by the International Code of Nomenclature for algae, fungi, and plants. Further helpful information by Sandra Knapp et al. is available here.

Authors describing new fungal taxa should register the names with a recognized repository, such as Mycobank, and request a unique digital identifier which should be included in the published article.

Zoological names

Since January 2012, electronic publication of zoological names has been a valid form of publication if certain conditions are met. Manuscripts containing new taxon names or other nomenclatural acts must follow the guidelines set by the International Commission on Zoological Nomenclature. We require the new taxon name and the article it is published in to be registered with ZooBank. The unique identifier provided by ZooBank should be included in the published article. Authors will be able to update ZooBank with the final citation following publication. Further helpful information by Frank-T. Krell is available here.

Bacterial names

In accordance with the International Code of Nomenclature of Prokaryotes (ICNP) effective publication of new prokaryotic names in electronic journals is possible. In order to comply with rules of the International Committee on Systematics of Prokaryotes (ICSP) for valid publication authors must submit a copy of the published article in its final form, together with certificates of deposition of the type strain (for unrestricted distribution), in at least two internationally recognized, publicly accessible culture collections located in different countries, to the International Journal of Systematic and Evolutionary Microbiology (IJSEM) editorial office. Following review by the List Editor, effectively published names that conform to all of the rules of the ICNP will appear on a subsequent Validation List, in the order received, thereby becoming validly published.

Virus names

The proposal of new virus names must follow the guidelines established by the International Committee on Taxonomy of Viruses (ICTV) in the International Code of Virus Classification and Nomenclature. Proposals for new virus taxa should be forwarded to the relevant Study Group of the ICTV for consideration.

Competing interests

Back to top

BMC requires authors to declare all competing interests in relation to their work. All submitted manuscripts must include a ‘competing interests’ section at the end of the manuscript listing all competing interests (financial and non-financial). Where authors have no competing interests, the statement should read “The author(s) declare(s) that they have no competing interests”. The Editor may ask for further information relating to competing interests.

Editors and reviewers are also required to declare any competing interests and may be excluded from the peer review process if a competing interest exists.

What constitutes a competing interest?

Competing interests may be financial or non-financial. A competing interest exists when the authors’ interpretation of data or presentation of information may be influenced by, or may be perceived to be influenced by, their personal or financial relationship with other people or organizations. Authors should disclose any financial competing interests but also any non-financial competing interests that may cause them embarrassment if they were to become public after the publication of the manuscript.

Financial competing interests

Financial competing interests include (but are not limited to):

·      Receiving reimbursements, fees, funding, or salary from an organization that may in any way gain or lose financially from the publication of the manuscript, either now or in the future.

·      Holding stocks or shares in an organization that may in any way gain or lose financially from the publication of the manuscript, either now or in the future.

·      Holding, or currently applying for, patents relating to the content of the manuscript.

·      Receiving reimbursements, fees, funding, or salary from an organization that holds or has applied for patents relating to the content of the manuscript.

Non-financial competing interests

Non-financial competing interests include (but are not limited to) political, personal, religious, ideological, academic, and intellectual competing interests. If, after reading these guidelines, you are unsure whether you have a competing interest, please contact info@biomedcentral.com.

Commercial organizations

Authors from pharmaceutical companies, or other commercial organizations that sponsor clinical trials, should declare these as competing interests on submission. They should also adhere to the Good Publication Practice guidelines for pharmaceutical companies (GPP2022), which are designed to ensure that publications are produced in a responsible and ethical manner. The guidelines also apply to any companies or individuals that work on industry-sponsored publications, such as freelance writers, contract research organizations and communications companies. BMC will not publish advertorial content.

Editorial Board Members, Guest Editors and Editors

Editorial Board Members, Guest Editors and Editors are required to declare any competing interests and may be excluded from the peer review process if a competing interest exists. 

In addition, they should exclude themselves from handling manuscripts in cases where there is a competing interest. This may include – but is not limited to – having previously published with one or more of the authors, and sharing the same institution as one or more of the authors.

Where an Editor, Guest Editor or Editorial Board Member is on the author list we recommend they declare this in the competing interests section on the submitted manuscript. If they are an author or have any other competing interest regarding a specific manuscript, another Editor, Guest Editor or member of the Editorial Board will be assigned to assume responsibility for overseeing peer review. These submissions are subject to the exact same review process as any other manuscript.

Editorial Board Members are welcome to submit papers to the journal. These submissions are not given any priority over other manuscripts, and Editorial Board Member status has no bearing on editorial consideration.

Editorial staff

All Springer Nature journal editorial staff are required to declare to their employer any interests — financial or otherwise — that might influence, or be perceived to influence, their editorial practices. Failure to do so is a disciplinary offence. Springer Nature has a strict policy of editorial independence in individual acceptance decisions and editorial standards of quality and significance should never be compromised. While some editors are financially incentivised to achieve journal growth, we are clear in our internal policies and individuals’ contracts or formal objectives that this should be achieved by ensuring submissions of sufficient quality and never by compromising editorial standards.

Authorship

Back to top

Authorship provides credit for a researcher’s contributions to a study and carries accountability. Authors are expected to fulfil the criteria below (adapted from McNutt et al.,Proceedings of the National Academy of Sciences, Feb 2018, 201715374; DOI: 10.1073/pnas.1715374115; licensed under CC BY 4.0): 

Each author is expected to have made substantial contributions to the conception OR design of the work; OR the acquisition, analysis, OR interpretation of data; OR the creation of new software used in the work; OR have drafted the work or substantively revised it

AND to have approved the submitted version (and any substantially modified version that involves the author's contribution to the study);

AND to have agreed both to be personally accountable for the author's own contributions and to ensure that questions related to the accuracy or integrity of any part of the work, even ones in which the author was not personally involved, are appropriately investigated, resolved, and the resolution documented in the literature.

BMC journals encourage collaboration with colleagues in the locations where the research is conducted, and expect their inclusion as co-authors when they fulfill all authorship criteria described above. Contributors who do not meet all criteria for authorship should be listed in the Acknowledgements section.

Please see individual journal's Submission Guidelines for information on the format for listing author contributions.

Any changes to the author list after submission, such as a change in the order of the authors or the deletion or addition of authors, must be approved by every author and a change of authorship form must be completed. Changes of authorship by adding or deleting authors, and/or changes in Corresponding Author, and/or changes in the sequence of authors are not permitted after acceptance of a manuscript.

Corresponding authors

Corresponding authors are responsible for ensuring that all listed authors have approved the manuscript before submission, including the names and order of authors, and that all authors receive the submission and all substantive correspondence with editors, as well as the full reviews, verifying that all data, figures, materials (including reagents), and code, even those developed or provided by other authors, comply with the transparency and reproducibility standards of both the field and journal.

This responsibility includes but is not limited to: (i) ensuring that original data/original figures/materials/code upon which the submission is based are preserved following best practices in the field so that they are retrievable for reanalysis; (ii) confirming that data/figures/materials/code presentation accurately reflects the original; and (iii) foreseeing and minimizing obstacles to the sharing of data/materials/code described in the work. The corresponding author should be responsible for managing these requirements across the author group and ensuring that the entire author group is fully aware of and in compliance with best practices in the discipline of publication.

To discourage ghost authorship, corresponding authors must reveal as appropriate whether the manuscript benefited from the use of editorial services that, if unacknowledged, might constitute an undisclosed conflict of interest. Examples include use of an editor from an organization that may have a vested interest in slanting the results or reliance on a technical writer at a level that would warrant authorship credit. These situations might variously be addressed by including a statement in the acknowledgments, by describing the effort in the methods section, or by adding an author.

The involvement of scientific (medical) writers or anyone else who assisted with the preparation of the manuscript content should be acknowledged, along with their source of funding, as described in the European Medical Writers Association (EMWA) guidelines. The role of medical writers should be acknowledged explicitly in the ‘Acknowledgements’ or ‘Authors’ contributions’ section as appropriate.

Corresponding authors should indicate whether any authors on earlier versions have been removed or new authors added and why. It is incumbent on the corresponding author to ensure that all authors (or group/laboratory leaders in large collaborations) have certified the author list and contribution description: that all authors who deserve to be credited on the manuscript are indeed identified, that no authors are listed who do not deserve authorship credit, and that author contributions, where they are provided, are expressed accurately.

Any potential authorship disputes brought to the editors’ attention will be handled in line with COPE guidelines.

Acknowledgements

All contributors who do not meet the criteria for authorship should be listed in an ‘Acknowledgements’ section. Examples of those who might be acknowledged include a person who provided purely technical help or writing assistance, or a department chair who provided only general support.

Third party submissions

All manuscripts must be submitted by an author and may not be submitted by a third party.

Author Name Change

An author who has changed their name for reasons such as gender transition or religious conversion may request for their name, pronouns and other relevant biographical information to be corrected on papers published prior to the change.  The author can choose for this correction to happen silently, in which case there will be no note flagging the change on either the pdf or the html of the paper, or alternatively they may do so by a formal public Author Correction.

For authors who’ve changed their name and wish to correct it on their published works, please see SNCS Contact Form: Inclusive Name Change Policy : Springer Nature Support.

Artificial Intelligence (AI)

Back to top

AI Authorship

Large Language Models (LLMs), such as ChatGPT, do not currently satisfy our authorship criteria. Notably an attribution of authorship carries with it accountability for the work, which cannot be effectively applied to LLMs. Use of an LLM should be properly documented in the Methods section (and if a Methods section is not available, in a suitable alternative part) of the manuscript. The use of an LLM (or other AI-tool) for “AI assisted copy editing” purposes does not need to be declared. In this context, we define the term "AI assisted copy editing" as AI-assisted improvements to human-generated texts for readability and style, and to ensure that the texts are free of errors in grammar, spelling, punctuation and tone. These AI-assisted improvements may include wording and formatting changes to the texts, but do not include generative editorial work and autonomous content creation. In all cases, there must be human accountability for the final version of the text and agreement from the authors that the edits reflect their original work.

Generative AI Images

The fast moving area of generative AI image creation has resulted in novel legal copyright and research integrity issues. As publishers, we strictly follow existing copyright law and best practices regarding publication ethics. While legal issues relating to AI-generated images and videos remain broadly unresolved, Springer Nature journals are unable to permit its use for publication. 

Exceptions:

·      Images/art obtained from agencies that we have contractual relationships with that have created images in a legally acceptable manner.

·      Images and videos that are directly referenced in a piece that is specifically about AI and such cases will be reviewed on a case-by-case basis.

·      The use of generative AI tools developed with specific sets of underlying scientific data that can be attributed, checked and verified for accuracy, provided that ethics, copyright and terms of use restrictions are adhered to.

*All exceptions must be labelled clearly as generated by AI within the image field.

As we expect things to develop rapidly in this field in the near future, we will review this policy regularly and adapt it if necessary.

Please note: Not all AI tools are generative. The use of non-generative machine learning tools to manipulate, combine or enhance existing images or figures should be disclosed in the relevant caption upon submission to allow a case-by-case review.

AI use by peer reviewers

Peer reviewers play a vital role in scientific publishing. Their expert evaluations and recommendations guide editors in their decisions and ensure that published research is valid, rigorous, and credible. Editors select peer reviewers primarily because of their in-depth knowledge of the subject matter or methods of the work they are asked to evaluate. This expertise is invaluable and irreplaceable. Peer reviewers are accountable for the accuracy and views expressed in their reports, and the peer review process operates on a principle of mutual trust between authors, reviewers and editors. Despite rapid progress, generative AI tools have considerable limitations: they can lack up-to-date knowledge and may produce nonsensical, biased or false information. Manuscripts may also include sensitive or proprietary information that should not be shared outside the peer review process. For these reasons we ask that, while Springer Nature explores providing our peer reviewers with access to safe AI tools, peer reviewers do not upload manuscripts into generative AI tools.

If any part of the evaluation of the claims made in the manuscript was in any way supported by an AI tool, we ask peer reviewers to declare the use of such tools transparently in the peer review report.

Citations

Back to top

Research articles and non-research articles (e.g. Opinion, Review, and Commentary articles) must cite appropriate and relevant literature in support of the claims made. Excessive self-citation, coordinated efforts among several authors to collectively self-cite, gratuitous and unnecessary citation of articles published in the journal to which the paper has been submitted, and any other form of citation manipulation are inappropriate. 

Citation manipulation will result in the article being rejected, and may be reported to authors’ institutions.  Similarly, any attempts by peer-reviewers or editors to encourage such practices should be reported by authors to the publisher. 

·      Authors should consider the following guidelines when preparing their manuscript: 

·      Any statement in the manuscript that relies on external sources of information (i.e. not the authors' own new ideas or findings or general knowledge) should use a citation.

·      Authors should avoid citing derivations of original work. For example, they should cite the original work rather than a review article that cites an original work.

·      Authors should ensure that their citations are accurate (i.e. they should ensure the citation supports the statement made in their manuscript and should not misrepresent another work by citing it if it does not support the point the authors wish to make).

·      Authors should not cite sources that they have not read.

·      Authors should not preferentially cite their own or their friends’, peers’, or institution’s publications.

·      Authors should avoid citing work solely from one country.

·      Authors should not use an excessive number of citations to support one point.

·      Ideally, authors should cite sources that have undergone peer review where possible.

·      Authors should not cite advertisements or advertorial material.

Preprint sharing and citation

Back to top

BMC journals encourage posting of preprints of primary research manuscripts on preprint servers of the authors’ choice, authors’ or institutional websites, and open communications between researchers whether on community preprint servers or preprint commenting platforms.

Preprints are defined as an author’s version of a research manuscript prior to formal peer review at a journal, which is deposited on a public server (as described in Preprints for the life sciences. Science 352, 899–901; 2016); preprints may be posted at any time during the peer review process. Posting of preprints is not considered prior publication and will not jeopardize consideration at BMC journals. Manuscripts posted on preprint servers will not be taken into account when determining the advance provided by a study under consideration at a BMC journal.

BMC has partnered with Research Square ( BMC has a majority interest in Research Square) to provide In Review, a journal-integrated solution for preprint sharing, supporting authors across all the communities we serve to share their research early. Authors submitting to some BMC journals are also able to publicly share information regarding their peer review through In Review.  General information about In Review at BMC and the Research Square preprint platform can be found here  and here .

Our policy on posting, licensing, citation of preprints and communications with the media about preprints of primary research manuscripts is summarized below.

Authors should disclose details of preprint posting, including DOI and licensing terms, upon submission of the manuscript or at any other point during consideration at a BMC journal. Once the preprint is published, it is the author’s responsibility to ensure that the preprint record is updated with a publication reference, including the DOI and a URL link to the published version of the article on the journal website.

Authors may choose any license of their choice for the preprint including Creative Commons licenses. The type of CC-license chosen will affect how the preprint may be shared and reused. More information to help guide licensing choices can be found in these resource documents developed by an ASAPbio licensing taskforce.

Preprints may be cited in the reference list of articles under consideration at BMC journals as shown below:

Babichev, S. A., Ries, J. & Lvovsky, A. I. Quantum scissors: teleportation of single-mode optical states by means of a nonlocal single photon. Preprint at http://arxiv.org/abs/quant-ph/0208066 (2002).

Authors posting preprints are asked to respect our policy on communications with the media. Researchers may respond to requests from the media in response to a preprint or conference presentation by providing explanation or clarification of the work, or information about its context. In these circumstances, media coverage will not hinder editorial handling of the submission. Researchers should be aware however that such coverage may reduce or pre-empt coverage by other media at the time of publication. We also advise that researchers approached by reporters in response to a preprint make it clear that the paper has not yet undergone peer review, that the findings are provisional and that the conclusions may change.  More information to help guide responsible communication of research reported in preprints can be found in these resource documents developed by the ASAPbio Preprints in the Public Eye project.

Information about our self-archiving policies and release of Author’s Accepted Manuscript may be found here

Duplicate publication

Back to top

Any manuscript submitted to a BMC journal must be original and the manuscript, or substantial parts of it, must not be under consideration by any other journal. In any case where there is the potential for overlap or duplication we require that authors are transparent. Authors should declare any potentially overlapping publications on submission. Any overlapping publications should be cited. Any ‘in press’ or unpublished manuscript cited, or relevant to the Editor’s and reviewers' assessment of the manuscript, should be made available if requested by the Editor. BMC reserves the right to judge potentially overlapping or redundant publications on a case-by-case basis.

In general, the manuscript should not already have been formally published in any journal or in any other citable form. If justified and made clear upon submission, there are exceptions to this rule. Details of these exceptions follow below and are also summarized in table 1.

BMC is a member of CrossCheck’s plagiarism detection initiative and takes seriously all cases of publication misconduct. Any suspected cases of covert duplicate manuscript submission will be handled as outlined in the COPE guidelines and the Editor may contact the authors’ institution (see Misconduct policy for more information). BMC endorses the policies of the ICMJE in relation to overlapping publications.

Complete manuscripts

Cochrane systematic reviews

BMC does not currently have a co-publication agreement with the Cochrane Library for its systematic reviews. BMC will therefore only consider publishing novel Cochrane systematic reviews, or updated versions of articles in the Cochrane Library, if they provide substantial new information.

Co-publication in multiple journals

If transparent, and with prior agreement of the relevant journals and under the conditions specified in the ICMJE guidelines, co-publication in multiple journals will be considered at the Editor's discretion.

Health technology assessment

The reports of the NHS Health Technology Assessment (HTA) programme are freely accessible in full online. At the Editor's discretion, some BMC journals will consider full or shortened versions of these articles for peer review.

Preprint servers and author/institutional repositories

Posting a manuscript on a preprint server or an author's personal or institutional website does not constitute previous publication.  Please see our preprint sharing and citation policy for further information. 

BMC encourages self-archiving by authors of manuscripts accepted for publication in its journals.

Theses

BMC will consider submissions containing material that has previously formed part of a PhD or other academic thesis including those that have been made publicly available according to the requirements of the institution awarding the qualification.

Translations into English

Authors should comply with the ICMJE guidelines and seek approval from the original publisher to check that they do not breach the copyright terms of the original publication and that the original publisher gives permission for publication of the translation under the relevant Creative Commons license.

Incomplete manuscripts

Abridged articles

At the Editor's discretion, some BMC journals will consider manuscripts that are substantially extended versions of articles that have previously been published in another peer-reviewed journal. In such cases the prior publication of an abridged version of the article would therefore not preclude publication, provided the new manuscript represents a substantially novel contribution to the scientific record. If applicable, the authors should seek approval from the original publisher before submitting the extended version of the manuscript.

Abstracts/posters

Prior abstracts of up to 400 words and posters presented at, or published as part of, academic meetings do not preclude consideration for peer review of a full manuscript, as the full manuscript represents a formal advance to the citable scientific record. Published abstracts should be cited. Authors should be aware that many conference proceedings exceed the allowable word limit and constitute a citable form.

Datasets

Making scientific data sets publicly available before associated manuscripts are submitted will not preclude consideration by a BMC journal. Because an increasing number of research funding agencies require that their grant holders share the 'raw data' research outputs, such data sharing is encouraged by BMC, provided appropriate safeguards are in place to protect personal or sensitive information. See the policy on publication of clinical datasets (above) for more information.

Non-research articles

Authors of non-research articles (usually commissioned reviews and commentaries) can include figures and tables that have been previously published in other journals provided they confirm on submission that permission has been obtained from the original publisher (if applicable) and cite the original article. Documentary evidence to support this permission must be made available to the Editor on request.

In order to avoid the potential for self-plagiarism, inadvertently or otherwise, authors agreeing to write commissioned articles should notify the Editor of any recent publications or invitations to write on a similar topic.

Open science

If authors have previously discussed or posted their own data in venues such as blogs, wikis, social networking websites, or online electronic lab notebooks, they are still able to submit their findings to BMC's journals. However, given the rapidly evolving nature of these resources, where discussion of data or manuscripts posted to these venues has subsequently been incorporated into the manuscript, the Editor will make their own assessment as to whether there may be duplication in the submitted manuscript.

Study protocols

Publication of study protocols reduces the risk of non-publication of research findings and facilitates methodological discussion, and is encouraged by a number of BMC journals. Therefore prior publication of a study protocol before submission of a manuscript reporting the results is not considered duplicate publication.

Summary clinical trial results in public registries

Posting of summary clinical trial results in publicly accessible databases is generally not considered duplicate publication. BMC requires authors of manuscripts reporting clinical trials to have registered their trial in a suitably accessible registry (see our Trial Registration policy for more information). In the US, submission of trial results to ClinicalTrials.gov is a statutory requirement. More information on this requirement can be found here.

Table 1. Generally permissible and non-permissible forms of duplicate/overlapping publication

Communication of findings prior to publication

Back to top

BMC journals do not wish to hinder communication among researchers. We support open communications between researchers whether on a recognised community preprint server, through discussions at conferences or on online collaborative sites such as wikis or the author’s blog.  Neither conference presentations nor posting on recognized preprint servers constitute prior publication.

Researchers may respond to requests from the media in response to a preprint or conference presentation, by providing explanation or clarification of the work, or information about its context. In these circumstances, media coverage will not hinder editorial handling of the submission. 

Researchers should be aware that such coverage may reduce or pre-empt coverage by other media at the time of publication. We also advise that researchers approached by reporters in response to a preprint make it clear that the paper has not yet undergone peer review, that the content is provisional and that the conclusions may change. Authors are expected to keep details of the peer review and editorial processes confidential.

We believe it important that the peer-reviewed and published version of a paper should be publicly available when the work is discussed in the public media, allowing the press to provide informed comment based on this version. For that reason, we strongly discourage the direct soliciting of media coverage to appear ahead of publication of the final version of a paper.

If further clarification is required, please contact the press office by e-mail.

Text recycling

Back to top

Authors should be aware that replication of text from their own previous publications is text recycling (also referred to as self-plagiarism), and in some cases is considered unacceptable. Where overlap of text with authors’ own previous publications is necessary or unavoidable, duplication must always be reported transparently and be properly attributed and compliant with copyright requirements. In collaboration with COPE, BMC has created guidelines for Editors on how to deal with text recycling which provide further detailed information on when text recycling is or is not considered acceptable. If a manuscript contains text that has been published elsewhere, authors should notify the Editor of this on submission.

Peer review

Back to top

All research articles, and most other article types, published in BMC journals undergo thorough peer review. This usually involves review by two independent peer reviewers. Individual journals may differ in their peer review processes; for example, some journals operate an open and others a closed peer review system. For an individual journal’s peer review policy, please see the journal's 'About' page.

Peer review policy

All submissions to BMC journals are assessed by an Editor, who will decide whether they are suitable for peer review. Where an Editor is on the author list or has any other competing interest regarding a specific manuscript, another member of the Editorial Board will be assigned to assume responsibility for overseeing peer review. Submissions felt to be suitable for consideration will be sent for peer review by appropriate independent experts identified by the Handling Editor. Editors will make a decision based on the reviewers’ reports and authors are sent these reports along with the editorial decision on their manuscript. Authors should note that even in light of one positive report, concerns raised by another reviewer may fundamentally undermine the study and result in the manuscript being rejected.

AI use by peer reviewers

Peer reviewers play a vital role in scientific publishing. Their expert evaluations and recommendations guide editors in their decisions and ensure that published research is valid, rigorous, and credible. Editors select peer reviewers primarily because of their in-depth knowledge of the subject matter or methods of the work they are asked to evaluate. This expertise is invaluable and irreplaceable. Peer reviewers are accountable for the accuracy and views expressed in their reports, and the peer review process operates on a principle of mutual trust between authors, reviewers and editors. Despite rapid progress,  generative AI tools have considerable limitations: they can lack up-to-date knowledge and may produce nonsensical, biased or false information. Manuscripts may also include sensitive or proprietary information that should not be shared outside the peer review process. For these reasons we ask that, while Springer Nature explores providing our peer reviewers with access to safe AI tools, peer reviewers do not upload manuscripts into generative AI tools.

If any part of the evaluation of the claims made in the manuscript was in any way supported by an AI tool, we ask peer reviewers to declare the use of such tools transparently in the peer review report.

Open peer review

For journals operating an open peer review process, the reviewers' names are included on the peer review reports. In addition, if the manuscript is published, the named reports are published online alongside the article. On rare occasions, information from the pre-publication history may not be available for a specific article.

Authors will be aware of the reviewers’ names during the peer review process and vice versa. However, there should not be direct correspondence between authors and reviewers. Any correspondence between the authors and the reviewers during or after the review process should be made through the journal Editors.

Transparent peer review

For journals operating a transparent peer review process, if the manuscript is published, the peer review reports are published online alongside the article. The name of the reviewer is not published. On rare occasions, information from the pre-publication history may not be available for a specific article.

Closed peer review

Most journals operate a closed peer review process. Reviewers will be treated anonymously and the pre-publication history of each article will not be made available online.

Peer reviewers

Authors may suggest potential reviewers if they wish; however, whether or not to consider these reviewers is at the Editor's discretion. Authors should not suggest recent collaborators or colleagues who work in the same institution as themselves. Authors who wish to suggest peer reviewers can do so in the cover letter and should provide institutional email addresses where possible, or information which will help the Editor to verify the identity of the reviewer (for example an ORCID or Scopus ID).

Authors may request exclusion of individuals as peer reviewers, but they should explain the reasons in their cover letter on submission. Authors should not exclude too many individuals as this may hinder the peer review process. Please note that the Editor may choose to invite excluded peer reviewers.

Intentionally falsifying information, for example, suggesting reviewers with a false name or email address, will result in rejection of the manuscript and may lead to further investigation in line with our misconduct policy.

Portability of peer review

Within BMC

To support efficient and thorough peer review, we aim to reduce the number of times a manuscript is re-reviewed after rejection from a BMC journal, thereby speeding up the publication process and reducing the burden on peer reviewers. If a manuscript does not reach the interest criteria of a given BMC journal, but is sound and in scope for another BMC journal, we offer authors the option to transfer the manuscript together with the reviewer reports to the other journal.

Editors may share manuscripts with Editors of other BMC journals before contacting authors in order to assess suitability for transfer to another journal. Authors who do not wish their manuscript to be shared with other BMC journals should indicate this in their cover letter on submission. Reviewers who do not wish us to share their report with another BMC journal should indicate this in the confidential section of their report. Transfer of a manuscript does not imply that it will be automatically accepted by the receiving journal, and on some occasions the Editor of the receiving journal may need to conduct their own peer review and/or reject the manuscript if it is not suitable.

If a manuscript is transferred to, and published in, a journal with open peer review, we will, wherever possible, make the reviewers' reports available through the pre-publication history of the article (see ‘Open peer review’ above). On some occasions this will not be possible; for example, when the manuscript has been peer reviewed in a closed peer review journal first. Although we will ask reviewers to make their reports available, reviewers providing reports for closed peer review journals will sometimes prefer to maintain this confidentiality and their anonymity.

Where a manuscript was initially reviewed in an open peer review journal and is subsequently transferred to a closed peer review journal and published, the reviews will not be published alongside the article.

Between BMC and other publishers/third parties

BMC supports innovations in peer review which can improve efficiency and save peer reviewers’ time and effort. Some BMC journals will consider manuscripts from other publishers. We are also willing to consider manuscripts which have been reviewed by third parties. However, submission of a manuscript with reviewer reports from another journal or an independent review service does not imply that it will be automatically accepted by the receiving journal and additional peer review may be required.

Author Submission Module: -

After Author login successfully open author dashboard screen. Two screen home and author submission list. First screen shows journal post list. And second is author submission list.

-Below screenshots journal post list.

-Below screenshots submission list.

- Click on new submission button author create new article. Author search by word and search by date

-Submission list shows article title, manuscript id , article type , authorship of author , current status and  after approval status add on submitted on and status date.

-Above screenshot first screen of new submission is select article type, add article title, manuscript file is allowing only doc, docxs, latex and pdf file types. Also add table allow docxs,doc and latex files , coverletter allow docxs docs and  pdf file types , supplement Allow only doc, docx, pdf, excel, csv file types. , data allow doc, docx, pdf, excel, csv file types and figure allow png and tiff file types  , multimedia allow png ,jpg file types . And click on next button.

-Below screenshots second step of new submission add abstract and keyword and add author. First author is by default login author add and login author add another author one is corresponding and by default another author is corresponding author. Add author first name, last name, Institution, email id is unique, orcid also unique and add Author Contribution(s).

After click on next button open third step is ICMJE Disclosure Form. Add information about date, manuscript title, manuscript number and add specification form. Below screenshot ICMJE Disclosure Form.

-After add new article of author and author submit article or save for later you can change in article when user save for later. And after submit article redirect submission list and this submission also view as pdf and view as html. Below screenshots show button of  view as pdf and view as html page.

1) screenshot of view as html: -

2) screenshot of view as pdf: -

-  After author click on approval button below screenshots shows approval button

-After click on approval button current status changed to submitted to journal.